Power supply lightning protector prevents the spread of overvoltages in the electrical installations
Brief introduction
Surge protector is the lightning protection measures taken by Zhejiang toer Electric Co., Ltd. for the electrical system. It is designed and manufactured according to the standard of IEC and GB, and meets the requirements of IEEE802.3AT for all kinds of electronic equipment, instruments and communication lines to provide safety protection. It is mainly used to limit overvoltage and vent. Discharge the electric current.
Use of attention
1. surge protector is installed with 35MM standard guide rail
2. surge protector is installed with 35MM standard guide rail
3. standard RJ45 interface can be conveniently connected to the front end of the protected equipment. The grounding path should be as short as possible, and the length should not exceed 1.5 meters.
Product features
1. safety insulation of fire retardant and high flame retardant material
2. self protection voltage is more than self protection, automatic disconnection and recovery.
3. with the power status indication, indicating the working state of surge protector.
Product specification
| Model |
TRS5-A4 |
| Rated Operating Voitage |
UC(VAC) |
275 |
| Voltage protective level |
Up(KV)≤ |
1.0 |
| Impuise current |
Iim(KA) |
4.5 |
| Operating Frequency |
50HZ |
| Lndication of invalidation |
Aging invalidation:green Normal,red:Invaldation |
| Operating condition |
Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
| Remote signal function |
Can also picking |
| Remarks |
Other max continuous operating voltage can be customized |
Working principle of product
In the equipment system, the inductive or capacitive coupling voltage is caused by the lightning shock and the switching operation of the upstream power supply system. Therefore, the surge may damage the photovoltaic modules and inverters and other devices. This will cause serious consequences for the operation of the system. The surge protector is a DC power defense specially designed for this purpose. The lightning module, once the high voltage, and endanger the insulation of the protected equipment, the lightning arrester acts immediately, the high voltage impact current guide the earth, thus limiting the voltage amplitude, protecting the insulation of the equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so as to protect the power equipment.
Company profile
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
Product Tags:
|
|
60KA surge protector SPD power lightning protection type 1 surge protector device Images
|
